Cisco 2960-S 10G WS-C2960S-48TD-L V04 48-Port Managed Gigabit Network Switch

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software – Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 12.2(58)SE2,
RELEASE SOFTWARE (fc1)
Technical Support: www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 21-Jul-11 02:22 by prod_rel_team

Initializing flashfs…
Using driver version 3 for media type 1
mifs[3]: 10 files, 1 directories
mifs[3]: Total bytes : 1806336
mifs[3]: Bytes used : 612352
mifs[3]: Bytes available : 1193984
mifs[3]: mifs fsck took 0 seconds.
mifs[3]: Initialization complete.

mifs[4]: 0 files, 1 directories
mifs[4]: Total bytes : 3870720
mifs[4]: Bytes used : 1024
mifs[4]: Bytes available : 3869696
mifs[4]: mifs fsck took 0 seconds.
mifs[4]: Initialization complete.

mifs[5]: 5 files, 1 directories
mifs[5]: Total bytes : 258048
mifs[5]: Bytes used : 9216
mifs[5]: Bytes available : 248832
mifs[5]: mifs fsck took 1 seconds.
mifs[5]: Initialization complete.

mifs[6]: 5 files, 1 directories
mifs[6]: Total bytes : 258048
mifs[6]: Bytes used : 9216
mifs[6]: Bytes available : 248832
mifs[6]: mifs fsck took 0 seconds.
mifs[6]: Initialization complete.

mifs[7]: 567 files, 19 directories
mifs[7]: Total bytes : 57931776
mifs[7]: Bytes used : 17675776
mifs[7]: Bytes available : 40256000
mifs[7]: mifs fsck took 1 seconds.
mifs[7]: Initialization complete.

…done Initializing flashfs.

POST: MA BIST : BeginYeti2S88gMdioWr: Unknown status for write operation
***ERR: S88G FC 1 MBIST Unload Activity

***ERR: S88G FC 1 MBIST failed
Yeti2S88gMdioWr: Unknown status for write operation
***ERR: S88G DP Sg1 MBIST Unload Activity

***ERR: S88G DP Sg1 MBIST failed
Yeti2S88gMdioWr: Unknown status for write operation
***ERR: S88G DP Xg1 MBIST Unload Activity

***ERR: S88G DP Xg1 MBIST failed
Yeti2S88gMdioWr: Unknown status for write operation
***ERR: S88G NI 1 MBIST Unload Activity

***ERR: S88G NI 1 MBIST failed
Yeti2S88gMdioWr: Unknown status for write operation
***ERR: S88G FC 0 MBIST Unload Activity

***ERR: S88G FC 0 MBIST failed
Yeti2S88gMdioWr: Unknown status for write operation
***ERR: S88G DP Sg0 MBIST Unload Activity

***ERR: S88G DP Sg0 MBIST failed
Yeti2S88gMdioWr: Unknown status for write operation
***ERR: S88G DP Xg0 MBIST Unload Activity

***ERR: S88G DP Xg0 MBIST failed
Yeti2S88gMdioWr: Unknown status for write operation
***ERR: S88G NI 0 MBIST Unload Activity

***ERR: S88G NI 0 MBIST failed
Yeti2S88gMdioWr: Unknown status for write operation
***ERR: S88G UPB MBIST Unload Activity

***ERR: S88G UPB MBIST failed
Yeti2S88gMdioWr: Unknown status for write operation
POST: MA BIST : End, Status Passed

POST: TCAM BIST : Begin
POST: TCAM BIST : End, Status Passed

extracting front_end/front_end_ucode_info (43 bytes)
Waiting for Stack Master Election…
POST: Thermal, Fan Tests : Begin
POST: Thermal, Fan Tests : End, Status Passed

POST: PortASIC Stack Port Loopback Tests : Begin
POST: PortASIC Stack Port Loopback Tests : End, Status Passed

POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed

POST: EMAC Loopback Tests : Begin
POST: EMAC Loopback Tests : End, Status Passed

Election Complete
Switch 1 booting as Master
Waiting for Port download…Complete

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
[email protected].

cisco WS-C2960S-48TD-L (PowerPC) processor (revision F0) with 131072K bytes of m
emory.
Processor board ID FOC1603X2V6
Last reset from power-on
1 Virtual Ethernet interface
1 FastEthernet interface
50 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : A4:56:30:A1:AC:00
Motherboard assembly number : 73-11905-09
Power supply part number : 341-0327-04
Motherboard serial number : FOC16027VD9
Power supply serial number : LIT1601077L
Model revision number : F0
Motherboard revision number : A0
Model number : WS-C2960S-48TD-L
Daughterboard assembly number : 73-11933-04
Daughterboard serial number : FOC16027R89
System serial number : FOC1603X2V6
Top Assembly Part Number : 800-30925-04
Top Assembly Revision Number : C0
Version ID : V04
CLEI Code Number : COMGD00ARD
Daughterboard revision number : A0
Hardware Board Revision Number : 0x01

Switch Ports Model SW Version SW Image
—— —– —– ———- ———-
* 1 52 WS-C2960S-48TD-L 12.2(58)SE2 C2960S-UNIVERSALK9-M

Press RETURN to get started!

*Mar 1 00:00:13.484: Read env variable – LICENSE_BOOT_LEVEL =
*Mar 1 00:00:14.071: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module nam
e = c2960s_lanbase Next reboot level = lanbase and License = lanbase
*Mar 1 00:02:03.847: %STACKMGR-4-SWITCH_ADDED: Switch 1 has been ADDED to the s
tackAuth Manager registration failed

*Mar 1 00:02:05.268: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, cha
nged state to down
*Mar 1 00:02:05.268: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et0, changed state to down
*Mar 1 00:02:06.788: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for typ
e vlan
*Mar 1 00:02:30.727: %STACKMGR-5-SWITCH_READY: Switch 1 is READY
*Mar 1 00:02:30.727: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1 Switch 1 has c
hanged to state DOWN
*Mar 1 00:02:30.727: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 2 Switch 1 has c
hanged to state DOWN
*Mar 1 00:02:31.204: %STACKMGR-5-MASTER_READY: Master Switch 1 is READY
*Mar 1 00:02:31.209: %SYS-5-RESTART: System restarted —
Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 12.2(58)SE2,
RELEASE SOFTWARE (fc1)
Technical Support: www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 21-Jul-11 02:22 by prod_rel_team
*Mar 1 00:02:32.892: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to
down
*Mar 1 00:02:34.460: %USB_CONSOLE-6-MEDIA_RJ45: Console media-type is RJ45.

— System Configuration Dialog —

Enable secret warning
———————————-
In order to access the device manager, an enable secret is required
If you enter the initial configuration dialog, you will be prompted for the enab
le secret
If you choose not to enter the intial configuration dialog, or if you exit setup
without setting the enable secret,
please set an enable secret using the following CLI in configuration mode-
enable secret 0
———————————-
Would you like to enter the initial configuration dialog? [yes/no]: n
Switch>en
Switch#show flash

Directory of flash:/

3 drwx 512 Mar 2 1993 02:51:25 +00:00 c2960s-universalk9-mz.122-
58.SE2
587 -rwx 1048 Mar 1 1993 00:02:36 +00:00 multiple-fs