Cisco WS-C2960S-48TS-L V03 48-Port Managed Gigabit Ethernet Network Switch

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software – Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 15.0(2)SE12,
RELEASE SOFTWARE (fc1)
Technical Support: www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Thu 09-Aug-18 06:17 by prod_rel_teamInitializing flashfs…
Using driver version 3 for media type 1
mifs[4]: 10 files, 1 directories
mifs[4]: Total bytes : 1806336
mifs[4]: Bytes used : 612352
mifs[4]: Bytes available : 1193984
mifs[4]: mifs fsck took 0 seconds.
mifs[4]: Initialization complete.

mifs[5]: 0 files, 1 directories
mifs[5]: Total bytes : 3870720
mifs[5]: Bytes used : 1024
mifs[5]: Bytes available : 3869696
mifs[5]: mifs fsck took 0 seconds.
mifs[5]: Initialization complete.

mifs[6]: 5 files, 1 directories
mifs[6]: Total bytes : 258048
mifs[6]: Bytes used : 9216
mifs[6]: Bytes available : 248832
mifs[6]: mifs fsck took 0 seconds.
mifs[6]: Initialization complete.

mifs[7]: 5 files, 1 directories
mifs[7]: Total bytes : 258048
mifs[7]: Bytes used : 9216
mifs[7]: Bytes available : 248832
mifs[7]: mifs fsck took 0 seconds.
mifs[7]: Initialization complete.

mifs[8]: 563 files, 19 directories
mifs[8]: Total bytes : 57931776
mifs[8]: Bytes used : 40964608
mifs[8]: Bytes available : 16967168
mifs[8]: mifs fsck took 1 seconds.
mifs[8]: Initialization complete.

…done Initializing flashfs.
Checking for Bootloader upgrade..
Boot Loader upgrade not required (Stage 2)

FIPS: Flash Key Check : Begin
FIPS: Flash Key Check : End, Not Found, FIPS Mode Not Enabled

POST: MA BIST : Begin
FC 1 MBIST Test Passed.
DP Sg1 MBIST Test Passed.
DP Xg1 MBIST Test Passed.
NI 1 MBIST Test Passed.
FC 0 MBIST Test Passed.
DP Sg0 MBIST Test Passed.
DP Xg0 MBIST Test Passed.
NI 0 MBIST Test Passed.
UPB MBIST Test Passed.
POST: MA BIST : End, Status Passed

POST: TCAM BIST : Begin
POST: TCAM BIST : End, Status Passed

extracting front_end/front_end_ucode_info (86 bytes)
Waiting for Stack Master Election…
POST: Thermal, Fan Tests : Begin
POST: Thermal, Fan Tests : End, Status Passed

POST: PortASIC Stack Port Loopback Tests : Begin
POST: PortASIC Stack Port Loopback Tests : End, Status Passed

POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed

POST: EMAC Loopback Tests : Begin
POST: EMAC Loopback Tests : End, Status Passed

Election Complete
Switch 1 booting as Master
Waiting for Port download…Complete

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
[email protected].

cisco WS-C2960S-48TS-L (PowerPC) processor (revision D0) with 131072K bytes of m
emory.
Processor board ID FOC1524Z1JG
Last reset from power-on
1 Virtual Ethernet interface
1 FastEthernet interface
52 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : D0:C2:82:8B:A9:00
Motherboard assembly number : 73-11909-06
Power supply part number : 341-0327-01
Motherboard serial number : FOC15233VSM
Power supply serial number : LIT143201ZF
Model revision number : D0
Motherboard revision number : A0
Model number : WS-C2960S-48TS-L
Daughterboard assembly number : 73-11933-04
Daughterboard serial number : FOC15233XCT
System serial number : FOC1524Z1JG
Top Assembly Part Number : 800-30950-03
Top Assembly Revision Number : A0
Version ID : V03
CLEI Code Number : COMGF00ARC
Daughterboard revision number : A0
Hardware Board Revision Number : 0x01

Switch Ports Model SW Version SW Image
—— —– —– ———- ———-
* 1 52 WS-C2960S-48TS-L 15.0(2)SE12 C2960S-UNIVERSALK9-M

Press RETURN to get started!

*Mar 1 00:00:22.680: Read env variable – LICENSE_BOOT_LEVEL =
*Jan 2 00:00:00.503: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module nam
e = c2960s_lanbase Next reboot level = lanbase and License = lanbase
*Jan 2 00:01:52.302: %STACKMGR-4-SWITCH_ADDED: Switch 1 has been ADDED to the s
tack
*Jan 2 00:01:53.634: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, cha
nged state to down
*Jan 2 00:01:53.634: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et0, changed state to down
*Jan 2 00:01:53.655: %SMI-5-CLIENT: Smart Install Client feature is enabled. I
t is recommended to disable the Smart Install feature when it is not actively us
ed. To disable feature execute ‘no vstack’ in configuration mode
*Jan 2 00:01:56.376: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for typ
e vlan
*Jan 2 00:01:56.722: %DC-4-FILE_OPEN_WARNING: Not able to open flash:/dc_profil
e_dir/dc_default_profiles.txt
*Jan 2 00:01:56.722: %DC-6-DEFAULT_INIT_INFO: Default Profiles DB not loaded.
*Jan 2 00:02:21.861: %STACKMGR-5-SWITCH_READY: Switch 1 is READY
*Jan 2 00:02:21.861: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1 Switch 1 has c
hanged to state DOWN
*Jan 2 00:02:21.861: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 2 Switch 1 has c
hanged to state DOWN
*Jan 2 00:02:22.433: %STACKMGR-5-MASTER_READY: Master Switch 1 is READY
*Jan 2 00:02:22.438: %USB_CONSOLE-6-MEDIA_RJ45: Console media-type is RJ45.
*Jan 2 00:02:22.884: %SYS-5-RESTART: System restarted —
Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 15.0(2)SE12,
RELEASE SOFTWARE (fc1)
Technical Support: www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Thu 09-Aug-18 06:17 by prod_rel_team
*Jan 2 00:02:24.876: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to
down

— System Configuration Dialog —

Enable secret warning
———————————-
In order to access the device manager, an enable secret is required
If you enter the initial configuration dialog, you will be prompted for the enab
le secret
If you choose not to enter the intial configuration dialog, or if you exit setup
If you choose not to enter the intial configuration dialog, or if you exit setup
please set an enable secret using the following CLI in configuration mode-
enable secret 0
———————————-
Would you like to enter the initial configuration dialog? [yes/no]: n
Switch>
*Jan 2 00:02:54.477: %LINK-5-CHANGED: Interface Vlan1, changed state to adminis
tratively down
*Jan 2 00:02:54.477: %LINK-5-CHANGED: Interface FastEthernet0, changed state to
administratively down
Switch>en
Switch#show flash

Directory of flash:/

2 -rwx 14574592 Dec 19 2018 20:44:36 +00:00 c2960s-universalk9-mz.150-
2.SE12.bin
3 -rwx 3096 Jul 19 2007 10:43:21 +00:00 multiple-fs
4 -rwx 10989364 Sep 24 2018 04:05:44 +00:00 c2960s-universalk9-mz.122-
55.SE12.bin
5 drwx 512 Mar 1 1993 00:11:34 +00:00 c2960s-universalk9-mz.122-
55.SE3