Name: Cisco Catalyst 48-Port Managed Switch 4948-10GE Ethernet 2*Optical Transceivers
Brand: Cisco
SKU: 258351
Availability: InStock

TESTING & COSMETIC NOTES:
This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING
This unit powers on and its LEDs light up. This unit is in good cosmetic condition and may have minor scratches and blemishes but they do not affect functionality. This unit has been reset to the factory default settings. See console log below. This unit does not come with a power cord.

COMPONENTS INCLUDED IN THIS AUCTION:

• (1) – CISCO CATALYST 48-PORT MANAGED SWITCH 4948-10GE GIGABIT ETHERNET W/RACKMOUNT
• (2) – CISCO X2-10GB-SR OPTICAL TRANSCEIVER MODULE
• (2) – CISCO POWER-ONE SPACSSCO-04 POWER SUPPLY

REPLACEMENT or MONEY BACK GUARANTEE:

When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee.

ADDITIONAL INFORMATION:

**********************************************************
* *
* Welcome to Rom Monitor for WS-C4948-10GE System. *
* Copyright (c) 2003-2011, by Cisco Systems, Inc. *
* All rights reserved. *
* *
**********************************************************

Rom Monitor Program Version 12.2(31r)SGA7
Supervisor: WS-C4948-10GE Chassis: WS-C4948
Hardware Revisions – Board: 8.5 CPLD Gill: 20

MAC Address : 00-24-14-ca-1f-7f
Ip Address : Not set.
Netmask : Not set.
Gateway : Not set.
TftpServer : Not set.

***** The system will autoboot in 5 seconds *****

Type control-C to prevent autobooting.
. . . . .

******** The system will autoboot now ********

config-register = 0x2142
Autobooting using BOOT variable specified file…..

Current BOOT file is — bootflash:cat4500-entservicesk9-mz.150-2.SG11.bin

Rommon reg: 0x00004180
############
Decompression done, relocating …

k2diags version 5.7

prod: WS-C4948-10GE part: 73-9344-10 serial: FOX1245GPDN

Power-on-self-test for Module 1: WS-C4948-10GE
Port/Test Status: (. = Pass, F = Fail, U = Untested)

Cpu Subsystem Tests …
seeprom: . temperature_sensor: .

Port Traffic: L2 Serdes Loopback …
0: . 1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: .
12: . 13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: .
24: . 25: . 26: . 27: . 28: . 29: . 30: . 31: . 32: . 33: . 34: . 35: .
36: . 37: . 38: . 39: . 40: . 41: . 42: . 43: . 44: . 45: . 46: . 47: .
62: . 63: .

Port Traffic: L2 Asic Loopback …
0: . 1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: .
12: . 13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: .
24: . 25: . 26: . 27: . 28: . 29: . 30: . 31: . 32: . 33: . 34: . 35: .
36: . 37: . 38: . 39: . 40: . 41: . 42: . 43: . 44: . 45: . 46: . 47: .
62: . 63: .

Switch Subsystem Memory …
1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: . 12: .
13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: . 24: .
25: . 26: . 27: . 28: . 29: . 30: . 31: . 32: . 33: . 34: . 35: . 36: .
37: . 38: . 39: . 40: . 41: . 42: . 43: . 44: . 45: . 46: . 47: . 48: .
49: . 50: . 51: .

Module 1 Passed

Exiting to ios…

Rommon reg: 0x00000180
#######################################################
Decompression done, relocating …

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software – Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-ENTSERVICESK9-M),
Version 15.0(2)SG11, RELEASE SOFTWARE (fc2)
Technical Support: http:www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Mon 24-Oct-16 09:48 by prod_rel_team
Image text-base: 0x10000000, data-base: 0x123AECA8

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http:www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
[email protected].

cisco WS-C4948-10GE (MPC8540) processor (revision 5) with 262144K bytes of memor
y.
Processor board ID FOX1245GPDN
MPC8540 CPU at 667Mhz, Fixed Module
Last reset from Reload
1 Virtual Ethernet interface
48 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.

Press RETURN to get started!

*Feb 15 18:31:11.319: Local Xaui 0 is TI
*Feb 15 18:31:11.319: Local Xaui 1 is TI
*Feb 15 18:31:24.083: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for typ
e vlan
*Feb 15 18:31:26.115: %C4K_IOSMODPORTMAN-6-MODULEONLINE: Module 1 (WS-C4948-10GE
S/N: FOX1245GPDN Hw: 3.4) is online
*Feb 15 18:31:26.147: %SYS-6-STARTUP_CONFIG_IGNORED: System startup configuratio
n is ignored based on the configuration register setting.
*Feb 15 18:31:26.371: %SYS-5-RESTART: System restarted —
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-ENTSERVICESK9-M),
Version 15.0(2)SG11, RELEASE SOFTWARE (fc2)
Technical Support: http:www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Mon 24-Oct-16 09:48 by prod_rel_team
Switch>
*Feb 15 18:31:33.523: Port Te1/49: X2 inserted: vendor: CISCO-AVAGO, p/n: QFBR-7
502-CS3, s/n: AGA1243XAKZ , DOM capable, the hole supports monitoring
*Feb 15 18:31:33.835: %C4K_IOSINTF-5-TRANSCEIVERINSERTED: Slot=1 Port=49: Transc
eiver has been inserted
*Feb 15 18:31:36.827: Port Te1/50: X2 inserted: vendor: CISCO-FINISAR, p/n: FTLX
8541E2-C3, s/n: FNS13290J8W , DOM capable, the hole supports monitoring
*Feb 15 18:31:36.831: %C4K_IOSINTF-5-TRANSCEIVERINSERTED: Slot=1 Port=50: Transc
eiver has been inserted
*Feb 15 18:31:45.839: %SFF8472-5-THRESHOLD_VIOLATION: Te1/49: Rx power low alarm
; Operating value: -40.0 dBm, Threshold value: -13.9 dBm.
*Feb 15 18:31:48.831: %SFF8472-5-THRESHOLD_VIOLATION: Te1/50: Rx power low alarm
; Operating value: -40.0 dBm, Threshold value: -13.9 dBm.
Switch>
Switch>
Switch>
Switch>show version
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-ENTSERVICESK9-M),
Version 15.0(2)SG11, RELEASE SOFTWARE (fc2)
Technical Support: http:www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Mon 24-Oct-16 09:48 by prod_rel_team
Image text-base: 0x10000000, data-base: 0x123AECA8

ROM: 12.2(31r)SGA7
Pod Revision 0, Force Revision 31, Gill Revision 20

Switch uptime is 1 minute
System returned to ROM by reload
System image file is “bootflash:cat4500-entservicesk9-mz.150-2.SG11.bin”
Last reload reason: Reload command

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http:www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
[email protected].

Configuration register is 0x2142

Switch>

Weight	20.00 lbs
Dimensions	16.00 × 18.00 × 2.00 in

Cisco Catalyst 48-Port Managed Switch 4948-10GE Ethernet 2*Optical Transceivers

Start working with us

Want to chat first?

Cisco Catalyst 48-Port Managed Switch 4948-10GE Ethernet 2*Optical Transceivers

Start working with us

Want to chat first?

Login

Register