TESTING & COSMETIC NOTES:
This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING
This unit powers on, lights up, and comes to a ready status. The unit has been reset to the factory default settings. See console log below.
COMPONENTS INCLUDED IN THIS AUCTION:
• (1) – DELL POWERCONNECT 6224P 24-PORT POE 4-SFP L3 MANAGED GIGABIT ETHERNET SWITCH
• (1) – POWER CORD
REPLACEMENT or MONEY BACK GUARANTEE:
When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee.
ADDITIONAL INFORMATION:
Boot Menu 3.3.10.3
CPU Card ID: 0x508541
/DskVol// – disk check in progress …
/DskVol// – Volume is OK
total # of clusters: 15,147
# of free clusters: 5,570
# of bad clusters: 0
total free space: 11,140 Kb
max contiguous free space: 11,153,408 bytes
# of files: 23
# of folders: 1
total bytes in files: 19,132 Kb
# of lost chains: 0
total bytes in lost chains: 0
volume descriptor ptr (pVolDesc): 0x3903150
XBD device block I/O handle: 0x10001
auto disk check on mount: DOS_CHK_REPAIR |DOS_CHK_VERB_2
volume write mode: copyback (DOS_WRITE)
max # of simultaneously open files: 52
file descriptors in use: 0
# of different files in use: 0
# of descriptors for deleted files: 0
# of obsolete descriptors: 0
current volume configuration:
– volume label: NO LABEL ; (in boot sector: )
– volume Id: 0xc8
– total number of sectors: 60,716
– bytes per sector: 512
– # of sectors per cluster: 4
– # of reserved sectors: 1
– FAT entry size: FAT16
– # of sectors per FAT copy: 60
– # of FAT table copies: 2
– # of hidden sectors: 4
– first cluster is in sector # 136
– Update last access date for open-read-close = FALSE
– directory structure: VFAT
– file name format: 8-bit (extended-ASCII)
– root dir start sector: 121
– # of sectors per root: 15
– max # of entries in root: 240
FAT handler information:
————————
– allocation group size: 2 clusters
– free space on volume: 11,407,360 bytes
Boot Menu 3.3.10.3
Select an option. If no selection in 10 seconds then
operational code will start.
1 – Start operational code.
2 – Start Boot Menu.
Select (1, 2):
Operational Code Date: Tue Oct 31 12:38:09 2017
Uncompressing…..
Adding 0 symbols for standalone.
CPU: Motorola E500 : Unknown system version. Processor #0.
Memory Size: 0x10000000. BSP version 1.2/0.
Created: Oct 31 2017, 12:27:43
ED&R Policy Mode: deployed
/DskVol// – disk check in progress …
dosChkLib : CLOCK_REALTIME is being reset to SUN DEC 23 07:29:20 2007
Value obtained from file system volume descriptor pointer: 0x359be30
The old setting was THU JAN 01 00:00:00 1970
Accepted system dates are greater than THU DEC 27 00:00:00 1990
/DskVol// – Volume is OK
total # of clusters: 15,147
# of free clusters: 5,570
# of bad clusters: 0
total free space: 11,140 Kb
max contiguous free space: 11,153,408 bytes
# of files: 23
# of folders: 1
total bytes in files: 19,132 Kb
# of lost chains: 0
total bytes in lost chains: 0
volume descriptor ptr (pVolDesc): 0x359be30
XBD device block I/O handle: 0x10001
auto disk check on mount: DOS_CHK_REPAIR |DOS_CHK_VERB_2
volume write mode: copyback (DOS_WRITE)
max # of simultaneously open files: 52
file descriptors in use: 0
# of different files in use: 0
# of descriptors for deleted files: 0
# of obsolete descriptors: 0
current volume configuration:
– volume label: NO LABEL ; (in boot sector: )
– volume Id: 0xc8
– total number of sectors: 60,716
– bytes per sector: 512
– # of sectors per cluster: 4
– # of reserved sectors: 1
– FAT entry size: FAT16
– # of sectors per FAT copy: 60
– # of FAT table copies: 2
– # of hidden sectors: 4
– first cluster is in sector # 136
– Update last access date for open-read-close = FALSE
– directory structure: VFAT
– file name format: 8-bit (extended-ASCII)
– root dir start sector: 121
– # of sectors per root: 15
– max # of entries in root: 240
FAT handler information:
————————
– allocation group size: 2 clusters
– free space on volume: 11,407,360 bytes
Timebase: 66.666666 MHz, MEM: 266.666664 MHz, PCI: 66.666666 MHz, CPU: 533.33332
8 MHz
PCI unit 0: Dev 0xb314, Rev 0x01, Chip BCM56314_A0, Driver BCM56314_A0
SOC unit 0 attached to PCI device BCM56314_A0
Adding BCM transport pointers
Configuring CPUTRANS TX
Configuring CPUTRANS RX
Instantiating /download as rawFs, device = 0x20001
Formatting /download for DOSFS
Instantiating /download as rawFs, device = 0x20001
Formatting…/download: file system is marked clean, skipping check
OK.
DEC 23 07:29:31 0.0.0.0-1 UNKN[268434720]: bootos.c(233) 1 %% Event(0xaaaa
aaaa)
Instantiating RamCP: as rawFs, device = 0x30001
Formatting RamCP: for DOSFS
Instantiating RamCP: as rawFs, device = 0x30001
RamCP:/ – disk check in progress …
RamCP:/ – Volume is OK
total # of clusters: 1,975
# of free clusters: 1,973
# of bad clusters: 0
total free space: 1,010,176
max contiguous free space: 1,010,176 bytes
# of files: 0
# of folders: 0
total bytes in files: 0
# of lost chains: 0
total bytes in lost chains: 0
OK.
(Unit 1 – Waiting to select management unit)>
Applying Global configuration, please wait …
Welcome to Dell Easy Setup Wizard
The Setup Wizard guides you through the initial switch configuration, and
gets you up and running as quickly as possible. You can skip the setup
wizard, and enter CLI mode to manually configure the switch. You must
respond to the next question to run the setup wizard within 60 seconds,
otherwise the system will continue with normal operation using the default
system configuration.Note: You can exit the setup wizard at any point
by entering [ctrl+z].
Would you like to run the setup wizard (you must answer this question within
60 seconds)? [Y/N]
No data within sixty seconds!!!
Thank you for using Dell Easy Set up Wizard. You will now enter CLI mode.
Applying Interface configuration, please wait …
console>
| Weight | 14.00 lbs |
|---|---|
| Dimensions | 19.00 × 16.00 × 2.00 in |
Related products
