Netgate APU4 pfSense Board Security Gateway Firewall and Enclosure *No PSU*

iPXE (http:/ipxe.org) 00:00.0 C000 PCI2.10 PnP PMMpmm call arg1=1
pmm call arg1=0
+DF0DA5C0pmm call arg1=1
pmm call arg1=0
+DF03A5C0 C000

Searching bootorder for: /rom@genroms/pxeboot.rom

Build date: Apr 5 2014
System memory size: 4592 MB

Press F12 for boot menu.

Searching bootorder for: HALT
drive 0x000f2520: PCHS=0/0/0 translation=lba LCHS=966/255/63 s=15523840
Space available for UMB: c1000-ee800, f0000-f2520
Returned 245760 bytes of ZoneHigh
e820 map has 7 items:
0: 0000000000000000 – 000000000009fc00 = 1 RAM
1: 000000000009fc00 – 00000000000a0000 = 2 RESERVED
2: 00000000000f0000 – 0000000000100000 = 2 RESERVED
3: 0000000000100000 – 00000000df14c000 = 1 RAM
4: 00000000df14c000 – 00000000e0000000 = 2 RESERVED
5: 00000000f8000000 – 00000000f9000000 = 2 RESERVED
6: 0000000100000000 – 000000011f000000 = 1 RAM
enter handle_19:
NULL
Booting from Hard Disk…
Booting from 0000:7c00
//bboooott//ccoonnffiigg:: –SS111155220000 –DD

Consoles: internal video/keyboard serial port
BIOS drive C: is disk0
BIOS 639kB/3653936kB available memory

FreeBSD/x86 bootstrap loader, Revision 1.1
(Tue Feb 4 13:01:52 EST 2020 [email protected])
Loading /boot/defaults/loader.conf
–

__
_ __ / _|___ ___ _ __ ___ ___
| ‘_ | |_/ __|/ _ ‘_ / __|/ _
| |_) | ___ __/ | | __ __/
| .__/|_| |___/___|_| |_|___/___|
|_|

+============Welcome to pfSense===========+ __________________________
| | / ___
| 1. Boot Multi User [Enter] | | /`
| 2. Boot [S]ingle User | | / 😐
| 3. [Esc]ape to loader prompt | | _________ ___/ /_ |
| 4. Reboot | | /` ____ / /__ ___/ |
| | | / / / / / / |
| Options: | | / /___/ / / / |
| 5. [K]ernel: kernel (1 of 2) | | / ______/ / / |
| 6. Configure Boot [O]ptions… | |/ / / / |
| | / /___/ |
| | / |
| | /_________________________/
+=========================================+

/boot/kernel/kernel text=0x18d6928 data=0x13f3db8+0x4fccf0 syms=[0x8+0x1a8638+0x
8+0x1a90e2]/boot/entropy size=0x1000
Booting…
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.3-STABLE #243 abf8cba50ce(RELENG_2_4_5): Tue Jun 2 17:53:37 EDT 2020

[email protected]:/build/ce-crossbuild-245/obj/amd64/YNx4Qq3j/b
uild/ce-crossbuild-245/sources/FreeBSD-src/sys/pfSense amd64
FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1
)
VT(vga): resolution 640×480
CPU: AMD G-T40E Processor (1000.02-MHz K8-class CPU)
Origin=”AuthenticAMD” Id=0x500f20 Family=0x14 Model=0x2 Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802209
AMD Features=0x2e500800
AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINI
T,WDT>
SVM: NP,NRIP,NAsids=8
TSC: P-state invariant, performance statistics
real memory = 4815060992 (4592 MB)
avail memory = 4045955072 (3858 MB)
Event timer “LAPIC” quality 600
ACPI APIC Table:
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
ioapic0 irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
Timecounter “TSC” frequency 1000023350 Hz quality 800
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LI
CENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /b
oot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806a2fd0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw
.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in
/boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff806a3080, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LIC
ENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /bo
ot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff806ca140, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LI
CENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /b
oot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff806ca1f0, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi
.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in
/boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff806ca2a0, 0) error 1
random: entropy device external interface
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LIC
ENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /bo
ot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff806a2f20, 0) error 1
wlan: mac acl policy registered
kbd0 at kbdmux0
000.000022 [4213] netmap_init netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff812d9960, 0) error 19
mlx5en: Mellanox Ethernet driver 3.5.2 (September 2019)
nexus0
vtvga0: on motherboard
cryptosoft0: on motherboard
padlock0: No ACE support.
acpi0: on motherboard
acpi0: Power Button (fixed)
cpu0: on acpi0
cpu1: on acpi0
atrtc0: port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer “RTC” frequency 32768 Hz quality 0
attimer0: port 0x40-0x43 irq 0 on acpi0
Timecounter “i8254” frequency 1193182 Hz quality 0
Event timer “i8254” frequency 1193182 Hz quality 100
Timecounter “ACPI-safe” frequency 3579545 Hz quality 850
acpi_timer0: port 0x808-0x80b on acpi0
hpet0: iomem 0xfed00000-0xfed003ff on acpi0
Timecounter “HPET” frequency 14318180 Hz quality 950
Event timer “HPET” frequency 14318180 Hz quality 550
Event timer “HPET1” frequency 14318180 Hz quality 450
pcib0: port 0xcf8-0xcff on acpi0
pci0: on pcib0
pcib1: irq 16 at device 4.0 on pci0
pci1: on pcib1
re0: port 0x1000-0x1
0ff mem 0xf7a00000-0xf7a00fff,0xf7900000-0xf7903fff irq 16 at device 0.0 on pci1

re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x2c000000
re0: MAC rev. 0x00200000
miibus0: on re0
rgephy0: PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX
, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-
master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 00:0d:b9:37:26:f4
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib2: irq 17 at device 5.0 on pci0
pci2: on pcib2
re1: port 0x2000-0x2
0ff mem 0xf7c00000-0xf7c00fff,0xf7b00000-0xf7b03fff irq 17 at device 0.0 on pci2

re1: Using 1 MSI-X message
re1: ASPM disabled
re1: Chip rev. 0x2c000000
re1: MAC rev. 0x00200000
miibus1: on re1
rgephy1: PHY 1 on miibus1
rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX
, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-
master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re1: Using defaults for TSO: 65518/35/2048
re1: Ethernet address: 00:0d:b9:37:26:f5
re1: netmap queues/slots: TX 1/256, RX 1/256
pcib3: irq 18 at device 6.0 on pci0
pci3: on pcib3
re2: port 0x3000-0x3
0ff mem 0xf7e00000-0xf7e00fff,0xf7d00000-0xf7d03fff irq 18 at device 0.0 on pci3

re2: Using 1 MSI-X message
re2: ASPM disabled
re2: Chip rev. 0x2c000000
re2: MAC rev. 0x00200000
miibus2: on re2
rgephy2: PHY 1 on miibus2
rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX
, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-
master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re2: Using defaults for TSO: 65518/35/2048
re2: Ethernet address: 00:0d:b9:37:26:f6
re2: netmap queues/slots: TX 1/256, RX 1/256
ahci0: port 0x4010-0x4017,0x4020-0x
4023,0×4018-0x401f,0x4024-0x4027,0x4000-0x400f mem 0xf7f04000-0xf7f043ff irq 19
at device 17.0 on pci0
ahci0: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported
ahci0: quirks=0x22000
ahcich0: at channel 0 on ahci0
ahcich1: at channel 1 on ahci0
ahcich2: at channel 2 on ahci0
ahcich3: at channel 3 on ahci0
ahcich4: at channel 4 on ahci0
ahcich5: at channel 5 on ahci0
ohci0: mem 0xf7f00000-0xf7f00fff irq 18 a
t device 18.0 on pci0
usbus0 on ohci0
usbus0: 12Mbps Full Speed USB v1.0
ehci0: mem 0xf7f04400-0xf7f044ff irq
17 at device 18.2 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
ohci1: mem 0xf7f01000-0xf7f01fff irq 18 a
t device 19.0 on pci0
usbus2 on ohci1
usbus2: 12Mbps Full Speed USB v1.0
ehci1: mem 0xf7f04500-0xf7f045ff irq
17 at device 19.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
usbus3: 480Mbps High Speed USB v2.0
isab0: at device 20.3 on pci0
isa0: on isab0
pcib4: at device 20.4 on pci0
pci4: on pcib4
ohci2: mem 0xf7f02000-0xf7f02fff irq 18 a
t device 20.5 on pci0
usbus4 on ohci2
usbus4: 12Mbps Full Speed USB v1.0
pcib5: at device 21.0 on pci0
pci5: on pcib5
ohci3: mem 0xf7f03000-0xf7f03fff at devic
e 22.0 on pci0
usbus5 on ohci3
usbus5: 12Mbps Full Speed USB v1.0
ehci2: mem 0xf7f04600-0xf7f046ff at d
evice 22.2 on pci0
usbus6: EHCI version 1.0
usbus6 on ehci2
usbus6: 480Mbps High Speed USB v2.0
acpi_button0: on acpi0
orm0: at iomem 0xee800-0xeffff on isa0
ppc0: cannot reserve I/O port range
uart0: at port 0x3f8 irq 4 flags 0x10 on isa0
uart0: console (115200,n,8,1)
uart1: at port 0x2f8 irq 3 on isa0
Timecounters tick every 1.000 msec
ugen5.1: at usbus5
ugen6.1: at usbus6
uhub0: on usbus5
uhub1: on usbus6
ugen3.1: at usbus3
ugen4.1: at usbus4
uhub2: on usbus3
uhub3: on usbus4
ugen1.1: at usbus1
ugen2.1: at usbus2
uhub4: on usbus1
uhub5: on usbus2
ugen0.1: at usbus0
uhub3: 2 ports with 2 removable, self powered
uhub6: on usbus0
uhub0: 4 ports with 4 removable, self powered
uhub5: 5 ports with 5 removable, self powered
uhub6: 5 ports with 5 removable, self powered
uhub1: 4 ports with 4 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub4: 5 ports with 5 removable, self powered
ugen6.2: at usbus6
umass0 on uhub1
umass0: on u
sbus6
Trying to mount root from ufs:/dev/ufsid/5fb2d7182630bb1b [rw,noatime]…
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: Removable Direct Access SPC-2 SCSI device
da0: Serial Number 058F63666485
da0: 40.000MB/s transfers
da0: 7580MB (15523840 512 byte sectors)
da0: quirks=0x2
Configuring crash dumps…
Using /dev/label/swap0 for dump device.
/dev/ufsid/5fb2d7182630bb1b: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ufsid/5fb2d7182630bb1b: clean, 1535020 free (292 frags, 191841 blocks, 0.0%
fragmentation)
Filesystems are clean, continuing…
Mounting filesystems…
random: unblocking device.

__
_ __ / _|___ ___ _ __ ___ ___
| ‘_ | |_/ __|/ _ ‘_ / __|/ _
| |_) | ___ __/ | | __ __/
| .__/|_| |___/___|_| |_|___/___|
|_|

Welcome to pfSense 2.4.5-RELEASE (Patch 1)…

No core dumps found.
…ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/li
b/ipsec /usr/local/lib/perl5/5.30/mach/CORE
32-bit compatibility ldconfig path:
done.
>>> Removing vital flag from php72… done.
External config loader 1.0 is now starting… da0s1 da0s1a da0s1b
Launching the init system…Updating CPU Microcode…
CPU: AMD G-T40E Processor (1000.02-MHz K8-class CPU)
Origin=”AuthenticAMD” Id=0x500f20 Family=0x14 Model=0x2 Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802209
AMD Features=0x2e500800
AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINI
T,WDT>
SVM: NP,NRIP,NAsids=8
TSC: P-state invariant, performance statistics
Done.
…… done.
Initializing……………… done.
Starting device manager (devd)…done.
Loading configuration……done.
.Updating configuration…………..done.
Checking config backups consistency…done.
Setting up extended sysctls…done.
Setting timezone…done.
Configuring looplo0: link state changed to UP
back interface…done.
Starting syslog…done.
Starting Secure Shell Services…done.
Setting up interfaces microcode…done.
Configuring loopback interface…done.
Creating wireless clone interfaces…done.
Configuring LAGG interfaces…done.
Configuring VLAN interfaces…done.
Configuring QinQ interfaces…done.
Configuring IPsec VTI interfaces…done.
Configuring WAN interface…done.
Configuring LAN interface…done.
Configuring CARP settings…done.
Syncing OpenVPN settings…done.
Configuring firewall……done.
Starting PFLOG…done.
Setting up gateway monitors…done.
Setting up static routes…done.
Setting up DNSs…
Starting DNS Resolver…done.
Synchronizing user settings…done.
Starting webConfigurator…done.
Configuring CRON…done.
Starting NTP time client…done.
Starting DHCP service…done.
Starting DHCPv6 service…done.
Configuring firewall……done.
Generating RRD graphs…done.
Starting syslog…done.
Starting CRON… done.
pfSense 2.4.5-RELEASE (Patch 1) amd64 Tue Jun 02 17:51:17 EDT 2020
Bootup complete

FreeBSD/amd64 (pfSense.localdomain) (ttyu0)

N
etgate APU – Netgate Device ID: 0d7f76b55e1f8688e199

*** Welcome to pfSense 2.4.5-RELEASE-p1 (amd64) on pfSense ***

WAN (wan) -> re1 ->
LAN (lan) -> re2 -> v4: 192.168.1.1/24

0) Logout (SSH only) 9) pfTop
1) Assign Interfaces 10) Filter Logs
2) Set interface(s) IP address 11) Restart webConfigurator
3) Reset webConfigurator password 12) PHP shell + pfSense tools
4) Reset to factory defaults 13) Update from console
5) Reboot system 14) Enable Secure Shell (sshd)
6) Halt system 15) Restore recent configuration
7) Ping host 16) Restart PHP-FPM
8) Shell