Oracle Talari E100 Adaptive Private Networking Appliance APN 128GB SSD 16GB RAM

Oracle Talari E100 Adaptive Private Networking Appliance APN 128GB SSD 16GB RAM - Image 2

Oracle Talari E100 Adaptive Private Networking Appliance APN 128GB SSD 16GB RAM - Image 3

Oracle Talari E100 Adaptive Private Networking Appliance APN 128GB SSD 16GB RAM - Image 4

Oracle Talari E100 Adaptive Private Networking Appliance APN 128GB SSD 16GB RAM - Image 5

Oracle Talari E100 Adaptive Private Networking Appliance APN 128GB SSD 16GB RAM - Image 6

Oracle Talari E100 Adaptive Private Networking Appliance APN 128GB SSD 16GB RAM - Image 7

Oracle Talari E100 Adaptive Private Networking Appliance APN 128GB SSD 16GB RAM - Image 8

Oracle Talari E100 Adaptive Private Networking Appliance APN 128GB SSD 16GB RAM

Name: Oracle Talari E100 Adaptive Private Networking Appliance APN 128GB SSD 16GB RAM
SKU: 258697
Availability: InStock

$99.99

5 in stock

SKU: 258697 Category: Firewall & VPN Devices Condition: Used

Description
Additional information

TESTING & COSMETIC NOTES:
This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING
The unit has been reset to the factory default settings. See console log below.

COMPONENTS INCLUDED IN THIS AUCTION:

• (1) – ORACLE TALARI E100 ADAPTIVE PRIVATE NETWORKING APPLIANCE APN 128GB SSD 16GB RAM
• (1) – POWER CORD

REPLACEMENT or MONEY BACK GUARANTEE:

When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee.

ADDITIONAL INFORMATION:

[ 0.073866] Initializing cgroup subsys freezer[ 0.078327] Initializing cgroup subsys net_cls[ 0.082796] Initializing cgroup subsys blkio[ 0.087092] Initializing cgroup subsys perf_event[ 0.091834] CPU: Physical Processor ID: 0[ 0.095862] CPU: Processor Core ID: 0[ 0.103346] mce: CPU supports 6 MCE banks[ 0.107377] CPU0: Thermal monitoring enabled (TM1)[ 0.112185] process: using mwait in idle threads[ 0.116820] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0[ 0.116820] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0[ 0.116820] tlb_flushall_shift: 6[ 0.131867] Freeing SMP alternatives memory: 8K (ffffffff81773000 – ffffffff8
1775000)[ 0.140847] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1[ 0.156878] smpboot: CPU0: Intel(R) Atom(TM) CPU C2758 @ 2.40GHz (fam: 06,
model: 4d, stepping: 08)[ 0.166240] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, fu
ll-width counters, Intel PMU driver.[ 0.176649] … version: 3[ 0.180671] … bit width: 40[ 0.184775] … generic registers: 2[ 0.188799] … value mask: 000000ffffffffff[ 0.194125] … max period: 000000ffffffffff[ 0.199451] … fixed-purpose events: 3[ 0.203474] … event mask: 0000000700000003[ 0.219037] x86: Booting SMP configuration:[ 0.223245] …. node #0, CPUs: #1[ 0.244103] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PM
U counter.[ 0.254542] #2 #3 #4 #5 #6 #7[ 0.369679] x86: Booted up 1 node, 8 CPUs[ 0.373901] smpboot: Total of 8 processors activated (38401.58 BogoMIPS)[ 0.381753] devtmpfs: initialized[ 0.385840] NET: Registered protocol family 16[ 0.390493] cpuidle: using governor ladder[ 0.394609] cpuidle: using governor menu[ 0.398597] ACPI: bus type PCI registered[ 0.402774] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xef
ffffff] (base 0xe0000000)[ 0.412094] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820[ 0.418891] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff](base 0xe0000000) (size reduced!)[ 0.429020] PCI: Using configuration type 1 for base access[ 0.440463] ACPI: Added _OSI(Module Device)[ 0.444664] ACPI: Added _OSI(Processor Device)[ 0.449117] ACPI: Added _OSI(3.0 _SCP Extensions)[ 0.453834] ACPI: Added _OSI(Processor Aggregator Device)[ 0.467823] ACPI: Interpreter enabled[ 0.471512] ACPI: (supports S0 S5)[ 0.474928] ACPI: Using IOAPIC for interrupt routing[ 0.480005] HEST: Table parsing has been initialized.[ 0.485070] PCI: Using host bridge windows from ACPI; if necessary, use “pci=
nocrs” and report a bug[ 0.501819] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])[ 0.508020] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM S
egments MSI][ 0.516805] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeC
apability][ 0.525155] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 0
0-3f] only partially covers this bridge[ 0.535729] PCI host bridge to bus 0000:00[ 0.539844] pci_bus 0000:00: root bus resource [bus 00-ff][ 0.545341] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7][ 0.551532] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff][ 0.557726] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff][ 0.564615] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff][ 0.571501] pci_bus 0000:00: root bus resource [mem 0x480000000-0xfffffffff][ 0.584604] pci 0000:00:01.0: PCI bridge to [bus 01][ 0.591606] pci 0000:00:02.0: PCI bridge to [bus 02][ 0.596652] pci 0000:00:03.0: PCI bridge to [bus 03][ 0.601695] pci 0000:00:04.0: PCI bridge to [bus 04][ 0.606875] ACPI: PCI Interrupt Link [LNKA] (IRQs 6 7 10 *11 12 15)[ 0.613470] ACPI: PCI Interrupt Link [LNKB] (IRQs 6 7 *10 11 12 15)[ 0.620057] ACPI: PCI Interrupt Link [LNKC] (IRQs 6 *7 10 11 12 15)[ 0.626661] ACPI: PCI Interrupt Link [LNKD] (IRQs 6 7 10 11 12 *15)[ 0.633255] ACPI: PCI Interrupt Link [LNKE] (IRQs 6 7 10 11 12 *15)[ 0.639858] ACPI: PCI Interrupt Link [LNKF] (IRQs 6 *7 10 11 12 15)[ 0.646450] ACPI: PCI Interrupt Link [LNKG] (IRQs 6 7 10 *11 12 15)[ 0.653046] ACPI: PCI Interrupt Link [LNKH] (IRQs 6 7 *10 11 12 15)[ 0.660545] ACPI: Enabled 1 GPEs in block 00 to 1F[ 0.665531] vgaarb: loaded[ 0.668371] PCI: Using ACPI for IRQ routing[ 0.673932] Switched to clocksource refined-jiffies[ 0.682819] pnp: PnP ACPI init[ 0.685912] ACPI: bus type PNP registered[ 0.690346] system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved[ 0.697323] system 00:00: [mem 0x7f800000-0x7fffffff] could not be reserved[ 0.704732] system 00:02: [io 0x0a00-0x0a0f] has been reserved[ 0.710670] system 00:02: [io 0x0a10-0x0a1f] has been reserved[ 0.716599] system 00:02: [io 0x0a20-0x0a2f] has been reserved[ 0.722531] system 00:02: [io 0x0a30-0x0a3f] has been reserved[ 0.730576] pnp: PnP ACPI: found 7 devices[ 0.734681] ACPI: bus type PNP unregistered[ 0.746394] Switched to clocksource acpi_pm[ 0.750677] pci 0000:00:01.0: PCI bridge to [bus 01][ 0.755674] pci 0000:00:01.0: bridge window [mem 0xdfb00000-0xdfdfffff][ 0.762495] pci 0000:00:02.0: PCI bridge to [bus 02][ 0.767493] pci 0000:00:02.0: bridge window [mem 0xdf800000-0xdfafffff][ 0.774317] pci 0000:00:03.0: PCI bridge to [bus 03][ 0.779324] pci 0000:00:04.0: PCI bridge to [bus 04][ 0.784672] NET: Registered protocol family 2[ 0.789964] TCP established hash table entries: 131072 (order: 8, 1048576 byt
es)[ 0.797868] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)[ 0.804900] TCP: Hash tables configured (established 131072 bind 65536)[ 0.811620] TCP: reno registered[ 0.814919] UDP hash table entries: 8192 (order: 6, 262144 bytes)[ 0.821172] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)[ 0.828008] NET: Registered protocol family 1[ 0.843785] Unpacking initramfs…[ 1.298144] Freeing initrd memory: 19740K (ffff880036ca9000 – ffff880037ff000
0)[ 1.305524] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)[ 1.312000] software IO TLB [mem 0x7b0f7000-0x7f0f7000] (64MB) mapped at [fff
f88007b0f7000-ffff88007f0f6fff][ 1.323008] futex hash table entries: 2048 (order: 5, 131072 bytes)[ 1.329397] audit: initializing netlink subsys (disabled)[ 1.334855] audit: type=2000 audit(1708983184.164:1): initialized[ 1.341669] HugeTLB registered 2 MB page size, pre-allocated 0 pages[ 1.348684] VFS: Disk quotas dquot_6.5.2[ 1.352698] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)[ 1.359306] msgmni has been set to 32146[ 1.363839] alg: No test for stdrng (krng)[ 1.368044] bounce: pool size: 64 pages[ 1.371984] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2
52)[ 1.379405] io scheduler noop registered[ 1.383356] io scheduler deadline registered[ 1.387789] io scheduler cfq registered (default)[ 1.393297] pcieport 0000:00:04.0: can’t derive routing for PCI INT A[ 1.399765] pcieport 0000:00:04.0: PCI INT A: no GSI[ 1.405162] ERST: Error Record Serialization Table (ERST) support is initiali
zed.[ 1.412680] pstore: Registered erst as persistent store backend[ 1.419346] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _O
SC.[ 1.426907] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled[ 1.454018] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 1655
0A[ 1.482204] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 1655
0A[ 1.490227] i8042: PNP: No PS/2 controller found. Probing ports directly.[ 1.777416] serio: i8042 KBD port at 0x60,0x64 irq 1[ 1.782681] mousedev: PS/2 mouse device common for all mice[ 1.796482] rtc_cmos 00:01: RTC can wake from S4[ 1.804888] input: AT Translated Set 2 keyboard as /devices/platform/i8042/se
rio0/input/input0[ 1.820212] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0[ 1.826368] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram[ 1.832791] TCP: cubic registered[ 1.836139] NET: Registered protocol family 17[ 1.840643] Key type dns_resolver registered[ 1.844956] Key type ceph registered[ 1.848833] libceph: loaded (mon/osd proto 15/24)[ 1.854207] registered taskstats version 1[ 1.859334] rtc_cmos 00:01: setting system clock to 2024-02-26 21:33:06 UTC (
1708983186)[ 1.869575] Freeing unused kernel memory: 840K (ffffffff816a1000 – ffffffff81
773000)[ 1.877441] Write protecting the kernel read-only data: 6144k[ 1.884074] Freeing unused kernel memory: 988K (ffff880001309000 – ffff880001
400000)[ 1.892560] Freeing unused kernel memory: 108K (ffff8800015e5000 – ffff880001
600000)
Loading, please wait…[ 1.918088] systemd-udevd[99]: starting version 215[ 1.923606] random: systemd-udevd urandom read with 20 bits of entropy availa
ble[ 1.942478] pps_core: LinuxPPS API ver. 1 registered[ 1.949529] ACPI: bus type USB registered[ 1.954056] usbcore: registered new interface driver usbfs[ 1.959989] pps_core: Software ver. 5.3.6 – Copyright 2005-2007 Rodolfo Giome
tti [ 1.960320] usbcore: registered new interface driver hub[ 1.960845] usbcore: registered new device driver usb[ 1.981358] PTP clock support registered[ 1.985661] SCSI subsystem initialized[ 1.990367] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver[ 1.997632] dca service started, version 1.12.1[ 2.005757] Intel(R) Gigabit Ethernet Network Driver – version 5.3.5.3[ 2.012871] Copyright (c) 2007-2015 Intel Corporation.[ 2.019006] ehci-pci: EHCI PCI platform driver[ 2.325706] tsc: Refined TSC clocksource calibration: 2399.999 MHz[ 3.332809] Switched to clocksource tsc[ 3.372531] igb 0000:00:14.0: added PHC on eth0[ 3.377122] igb 0000:00:14.0: Intel(R) Gigabit Ethernet Network Connection[ 3.384063] igb 0000:00:14.0: eth0: (PCIe:integrated:integrated)[ 3.390223] igb 0000:00:14.0 eth0: MAC: 44:d6:3d:2d:d5:a2[ 3.395747] igb 0000:00:14.0: eth0: PBA No: 001700-000[ 3.401760] igb 0000:00:14.0: LRO is disabled[ 3.406146] igb 0000:00:14.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx que
ue(s)[ 4.766558] igb 0000:00:14.1: added PHC on eth1[ 4.771152] igb 0000:00:14.1: Intel(R) Gigabit Ethernet Network Connection[ 4.778076] igb 0000:00:14.1: eth1: (PCIe:integrated:integrated)[ 4.784233] igb 0000:00:14.1 eth1: MAC: 44:d6:3d:2d:d5:a3[ 4.789744] igb 0000:00:14.1: eth1: PBA No: 001700-000[ 4.795765] igb 0000:00:14.1: LRO is disabled[ 4.800177] igb 0000:00:14.1: Using MSI-X interrupts. 1 rx queue(s), 1 tx que
ue(s)[ 6.160604] igb 0000:00:14.2: added PHC on eth2[ 6.165198] igb 0000:00:14.2: Intel(R) Gigabit Ethernet Network Connection[ 6.172139] igb 0000:00:14.2: eth2: (PCIe:integrated:integrated)[ 6.178302] igb 0000:00:14.2 eth2: MAC: 44:d6:3d:2d:d5:a4[ 6.183824] igb 0000:00:14.2: eth2: PBA No: 001700-000[ 6.189846] igb 0000:00:14.2: LRO is disabled[ 6.194258] igb 0000:00:14.2: Using MSI-X interrupts. 1 rx queue(s), 1 tx que
ue(s)[ 7.554659] igb 0000:00:14.3: added PHC on eth3[ 7.559254] igb 0000:00:14.3: Intel(R) Gigabit Ethernet Network Connection[ 7.566178] igb 0000:00:14.3: eth3: (PCIe:integrated:integrated)[ 7.572338] igb 0000:00:14.3 eth3: MAC: 44:d6:3d:2d:d5:a5[ 7.577845] igb 0000:00:14.3: eth3: PBA No: 001700-000[ 7.583855] igb 0000:00:14.3: LRO is disabled[ 7.588279] igb 0000:00:14.3: Using MSI-X interrupts. 1 rx queue(s), 1 tx que
ue(s)[ 7.596223] ahci 0000:00:17.0: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x4 imp
l SATA mode[ 7.604438] ahci 0000:00:17.0: flags: 64bit ncq led clo pio deso sadm sds aps
t[ 7.612390] scsi0 : ahci[ 7.615186] scsi1 : ahci[ 7.617902] scsi2 : ahci[ 7.620594] scsi3 : ahci[ 7.623220] ata1: DUMMY[ 7.625704] ata2: DUMMY[ 7.628193] ata3: SATA max UDMA/133 abar m2048@0xdff36000 port 0xdff36200 irq
52[ 7.635879] ata4: DUMMY[ 7.637769] igb 0000:01:00.0: added PHC on eth4[ 7.637771] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection[ 7.637774] igb 0000:01:00.0: eth4: (PCIe:2.5GT/s:Width x1)[ 7.637776] igb 0000:01:00.0 eth4: MAC: 44:d6:3d:2d:d5:a6[ 7.637863] igb 0000:01:00.0: eth4: PBA No: 000200-000[ 7.637915] igb 0000:01:00.0: LRO is disabled[ 7.637917] igb 0000:01:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx que
ue(s)[ 7.678620] ehci-pci 0000:00:16.0: EHCI Host Controller[ 7.679791] igb 0000:02:00.0: added PHC on eth5[ 7.679793] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection[ 7.679795] igb 0000:02:00.0: eth5: (PCIe:2.5GT/s:Width x1)[ 7.679798] igb 0000:02:00.0 eth5: MAC: 44:d6:3d:2d:d5:a7[ 7.679887] igb 0000:02:00.0: eth5: PBA No: 000200-000[ 7.679940] igb 0000:02:00.0: LRO is disabled[ 7.679942] igb 0000:02:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx que
ue(s)[ 7.723782] ehci-pci 0000:00:16.0: new USB bus registered, assigned bus numbe
r 1[ 7.731690] ehci-pci 0000:00:16.0: debug port 2[ 7.740527] ehci-pci 0000:00:16.0: irq 23, io mem 0xdff37000[ 7.751887] ehci-pci 0000:00:16.0: USB 2.0 started, EHCI 1.00[ 7.757767] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002[ 7.764614] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=
1[ 7.771903] usb usb1: Product: EHCI Host Controller[ 7.776819] usb usb1: Manufacturer: Linux 3.16.7-e100v1 ehci_hcd[ 7.782882] usb usb1: SerialNumber: 0000:00:16.0[ 7.787757] hub 1-0:1.0: USB hub found[ 7.791560] hub 1-0:1.0: 8 ports detected[ 7.796964] ahci 0000:00:18.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x0 imp
l SATA mode[ 7.805130] ahci 0000:00:18.0: flags: 64bit ncq led clo pio deso sadm sds aps
t[ 7.812853] scsi4 : ahci[ 7.815593] scsi5 : ahci[ 7.818219] ata5: DUMMY[ 7.820706] ata6: DUMMY[ 7.983073] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)[ 7.990708] ata3.00: ATA-9: SanDisk SD8SBAT128G1122, Z2333000, max UDMA/133[ 7.997807] ata3.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA[ 8.012452] ata3.00: configured for UDMA/133[ 8.027280] scsi 2:0:0:0: Direct-Access ATA SanDisk SD8SBAT1 3000 PQ
: 0 ANSI: 5[ 8.040188] sd 2:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119
GiB)[ 8.047870] sd 2:0:0:0: [sda] Write Protect is off[ 8.053074] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, does
n’t support DPO or FUA[ 8.063167] sda: sda1 sda2 sda3 sda4 [ 8.068815] sd 2:0:0:0: [sda] Attached SCSI disk[ 8.103156] usb 1-1: new high-speed USB device number 2 using ehci-pci
Begin: Loading essential drivers … done.
Begin: Running /scripts/init-premount … done.
Begin: Mounting root file system … Begin: Running /scripts/local-top … done.

Begin: Running /scripts/local-premount … done.
Begin: Will now check root file system … fsck from util-linux 2.25.2
fsck: error 2 (No such file or directory) while executing fsck.ext3 for /dev/sda
2
fsck exited with status code 8
done.
Warning: File system check failed but did not detect errors[ 8.223662] usb 1-1: New USB device found, idVendor=8087, idProduct=07db[ 8.230592] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 8.238082] hub 1-1:1.0: USB hub found[ 8.242043] hub 1-1:1.0: 4 ports detected[ 13.180948] kjournald starting. Commit interval 5 seconds[ 13.180964] EXT3-fs (sda2): mounted filesystem with ordered data mode
done.
Begin: Running /scripts/local-bottom … done.
Begin: Running /scripts/init-bottom … done.
INIT: version 2.88 booting[ 13.435642] random: nonblocking pool is initialized[….] Starting the hotplug events dispatcher: udevd[ 13.597465] systemd-udevd[331]: starting version 215[ ok .[….] Synthesizing the initial hotplug events…[ 13.663299] input: Power But
ton as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1[ 13.670839] ACPI: Power Button [PWRF][ 13.674809] ipmi message handler version 39.2[ 13.683133] systemd-udevd[354]: renamed network interface eth4 to tn-mgt1[ ok [ 13.694979] IPMI System Interface driver.
done.[ 13.701315] ipmi_si: Unable to find any System Interface(s)[ 13.703674] systemd-udevd[359]: renamed network interface eth5 to tn-mgt0[ 13.715945] microcode: CPU0 sig=0x406d8, pf=0x1, revision=0x121[ 13.722417] platform microcode: firmware: failed to load intel-ucode/06-4d-08
(-2)[ 13.722420] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt[ 13.736630] microcode: CPU1 sig=0x406d8, pf=0x1, revision=0x121[ 13.737709] systemd-udevd[358]: renamed network interface eth1 to tn-wbp0[ 13.749606] platform microcode: firmware: failed to load intel-ucode/06-4d-08
(-2)[….] Waiting for /dev[ 13.758948] microcode: CPU2 sig=0x406d8, pf=0x1, revis
ion=0x121
to be fully pop[ 13.759711] systemd-udevd[360]: renamed network interface eth
3 to tn-wbp1
ulated…[ 13.773599] platform microcode: firmware: failed to load intel-ucode
/06-4d-08 (-2)[ 13.782010] microcode: CPU3 sig=0x406d8, pf=0x1, revision=0x121[ 13.785715] systemd-udevd[365]: renamed network interface eth0 to tn-lbp0[ 13.794885] platform microcode: firmware: failed to load intel-ucode/06-4d-08
(-2)[ 13.802677] microcode: CPU4 sig=0x406d8, pf=0x1, revision=0x121[ 13.806743] systemd-udevd[357]: renamed network interface eth2 to tn-lbp1[ 13.815746] platform microcode: firmware: failed to load intel-ucode/06-4d-08
(-2)[ 13.823830] microcode: CPU5 sig=0x406d8, pf=0x1, revision=0x121[ 13.829822] platform microcode: firmware: failed to load intel-ucode/06-4d-08
(-2)[ 13.837863] microcode: CPU6 sig=0x406d8, pf=0x1, revision=0x121[ 13.843879] platform microcode: firmware: failed to load intel-ucode/06-4d-08
(-2)[ 13.851563] microcode: CPU7 sig=0x406d8, pf=0x1, revision=0x121[ 13.857686] iTCO_vendor_support: vendor-support=0[ 13.858238] platform microcode: firmware: failed to load intel-ucode/06-4d-08
(-2)[ 13.858446] microcode: Microcode Update Driver: v2.00 <[email protected].
co.uk>, Peter Oruba[ 13.879990] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11[ 13.885729] iTCO_wdt: Found a Avoton SoC TCO device (Version=3, TCOBASE=0x046
0)[ 13.893291] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)[ 13.906598] SSE version of gcm_enc/dec engaged.[ 13.914385] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)[ ok done.[….] Setting parameters of disc: (none)[ ok .[….] Activating swap…[ 14.796129] Adding 1048572k swap on /dev/sda5. Prio
rity:-1 extents:1 across:1048572k SS[ ok done.[….] Checking root file system…fsck from util-linux 2.25.2
e2fsck 1.42.12 (29-Aug-2014)
Pass 1: Checking inodes, blocks, and sizes
Primary_OS: |= | 2.2%
Primary_OS: |===== / 8.8%
Primary_OS: |========== – 17.5%
Primary_OS: |============ 21.9%
Primary_OS: |=============== | 26.2%
Primary_OS: |================= / 30.6%
Primary_OS: |======================= – 41.6%
Primary_OS: |============================ 50.3%
Primary_OS: |==================================== | 63.4%

Pass 2: Checking directory structure
Primary_OS: |======================================= / 70.4%
Primary_OS: |========================================= – 72.7%
Primary_OS: |========================================== 75.5%
Primary_OS: |=========================================== | 77.6%
Primary_OS: |============================================= / 80.1%
Primary_OS: |=============================================== – 83.3%
Primary_OS: |================================================ 85.9%
Primary_OS: |================================================= | 88.4%

Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Primary_OS: |==================================================== / 93.0%

Pass 5: Checking group summary information
Primary_OS: |========================================================| 100.0%
Primary_OS: 46319/262144 files (0.2% non-contiguous), 429115/1048576 blocks[ ok done.[ 17.016285] EXT3-fs (sda2): using internal journal[….] Cleaning up temporary files… /tmp[ ok .[info] Loading kernel module ipv6.[ 17.373282] NET: Registered protocol family 10[ 17.390196] fuse init (API version 7.23)

[….] Activating lvm and md swap…[ ok done.[….] Checking file systems…fsck from util-linux 2.25.2
e2fsck 1.42.12 (29-Aug-2014)
Pass 1: Checking inodes, blocks, and sizes

Pass 2: Checking directory structure

Pass 3: Checking directory connectivity
Pass 4: Checking reference counts

Pass 5: Checking group summary information

Data: 2914/7225344 files (2.5% non-contiguous), 372712/28874070 blocks[ ok done.[….] Mounting local filesystems…[ 25.229345] kjournald starting. Commit i
nterval 5 seconds[ 25.234925] EXT3-fs (sda1): using internal journal[ 25.239771] EXT3-fs (sda1): mounted filesystem with ordered data mode[ 25.248889] kjournald starting. Commit interval 5 seconds[ 25.249012] EXT3-fs (sda6): using internal journal[ 25.249014] EXT3-fs (sda6): mounted filesystem with ordered data mode[ ok done.[….] Activating swapfile swap…[ ok done.[….] Cleaning up temporary files…[ ok .[….] Setting kernel variables …[ 25.494933] IPv6: ADDRCONF(NETDEV_UP): lo:
link is not ready[ ok done.[….] Configuring network interfaces…[ 25.921830] IPv6: ADDRCONF(NETDEV_UP)
: tn-mgt1: link is not ready[ 26.360171] IPv6: ADDRCONF(NETDEV_UP): tn-mgt0: link is not ready[ ok done.[….] Cleaning up temporary files…[ ok .[info] Setting console screen modes and fonts.
setterm: cannot (un)set powersave mode: Inappropriate ioctl for device[….] Setting sensors limits[ ok .
Loading the saved-state of the serial devices…[….] Setting up X socket directories… /tmp/.X11-unix /tmp/.ICE-unix[ ok .
INIT: Entering runlevel: 2[….] Starting cgroup management daemon: cgmanager[….] Starting Munin-Node: d
one[ ok .[….] Starting enhanced syslogd: rsyslogd[ ok .[….] Starting ACPI services…[ ok .[….] Starting web based terminal: ajaxterm[ ok .[….] Starting deferred execution scheduler: atd[ ok .[….] Starting cgroup management proxy daemon: cgproxy[ ok .[….] Starting periodic command scheduler: cron[ ok .[….] Starting system message bus: dbus[ ok .
mcelog: Family 6 Model 4d CPU: only decoding architectural errors
Starting Machine Check Exceptions decoder: mcelog.[….] Starting MariaDB database server: mysqld .[ ok .[….] Starting NTP server: ntpd[ ok .[….] Starting S.M.A.R.T. daemon: smartd[ ok .[….] Starting Talari system setup: talari_hardware[….] Enabling E100v1 modul
es: talari_hardware[ 42.847490] Lanner Platform <> Watchdog/Bypass V
ersion V1.1 2014-01-23 — loaded[ 42.859876] Lanner Platform <> Status LED Driver Version V1.0 2013-1
0-17 — loaded[ 42.872024] Parallel LCM Driver Version 0.1.2 is loaded[ 42.877371] plcm_drv: LPTx Address = 378[ 43.015560] AMD Vendor ID: 0x1f418086[ 43.019320] Probe SMBUS controller..Got SMBUS IO = 0xf000[ 43.024873] Lanner Bypass/Watchdog Module Driver Version V1.2.0 2013-10-19 —
loaded[ 43.038276] lannar_hwm: Found NCT6776D/F or compatible chip at 0x4e:0xa10[ ok .[….] Starting web server: apache2AH00548: NameVirtualHost has no effect and wi
ll be removed in the next release /etc/apache2/sites-enabled/000-default.conf:1[ ok .[….] Starting SNMP services::DBI connect(‘database=T2_Stats;host=localhost’,’r
oot’,…) failed: Unknown database ‘T2_Stats’ at /home/talariuser/bin/t2_snmp_su
bagent.pl line 135.
DBI connect(‘database=T2_Config;host=localhost’,’root’,…) failed: Unknown data
base ‘T2_Config’ at /home/talariuser/bin/t2_snmp_subagent.pl line 136.
DBI connect(‘database=T2_Events;host=localhost’,’root’,…) failed: Unknown data
base ‘T2_Events’ at /home/talariuser/bin/t2_snmp_subagent.pl line 137.
snmpd[….] Starting OpenBSD Secure Shell server: sshd[ ok .[ 48.873176] Device: 1015808.0[ 48.876173] Lanner Parallel LCM Driver Opened[ 79.053779] Lanner Parallel LCM Driver Closed[ 79.059793] Device: 1015808.0[ 79.062821] Lanner Parallel LCM Driver Opened[ 79.093118] Lanner Parallel LCM Driver Closed
set_bypass_all_modes@wdt_api_e100.h:375 Bypass configuration changed!
t2_lcd_boot: Set Ports to Block, Input Timeout
t2_daemon: Starting Talari processes
kernel.core_pattern = |/home/talariuser/bin/t2_save_core.pl %p %e
t2_daemon: Tearing down Service Chaining bridges
t2_daemon: Building Service Chaining bridges and starting VMs
t2_daemon: Running LCD_util[ 82.018479] Device: 1015808.0[ 82.021519] Lanner Parallel LCM Driver Opened
msgget error: (No such file or directory):[ 84.065030] Lanner Parallel LCM Driver Closed[….] Starting Talari processes:t2_daemon: process_monitoring
process_monitoring hd_failsafe[ 86.044777] kjournald starting. Commit interv
al 5 seconds[ 86.048575] EXT3-fs (sda3): mounted filesystem with ordered data mode
t2_daemon: t2_keepalive
t2_reboott2_daemon: t2_reboot
t2_restartt2_daemon: t2_restart[ ok .
t2_daemon: Talari process startup complete

Debian GNU/Linux 8 talari ttyS0

talari login: [ 88.960802] kjournald starting. Commit interval 5 seconds[ 88.964795] EXT3-fs (sda3): mounted filesystem with ordered data mode

Debian GNU/Linux 8 talari ttyS0

talari login: talariuser
Password:
Linux talari 3.16.7-e100v1 #1 SMP PREEMPT Sat Dec 17 02:51:29 UTC 2016 x86_64
======================================================================

Operating System 5.0 on E100v1
Host IP = 10.156.10.10

======================================================================[ 195.905844] systemd-logind[8763]: New seat seat0.[ 195.919310] systemd-logind[8763]: Failed to start user service: Unknown unit:
[email protected][ 195.935158] systemd-logind[8763]: New session c1 of user talariuser.
talariuser@Talari-E100:~#